welding rod
英 [ˈweldɪŋ rɒd]
美 [ˈweldɪŋ rɑːd]
网络 焊条; 电焊条; 求购焊条; 焊條
双语例句
- This paper presents the development of a new type build-up welding rod used for hot forging die.
研究了一种新型热锻模堆焊焊条。 - Study on Characteristics of Bainitic Welding Rod for Direct Built-up Welding in Rail
贝氏体焊条直接堆焊修复铁路钢轨特性研究 - Be able to use all kind of welding rod such as acid basic and stainless steel rod.
本机可用于压力容器等各种刚结构材料的焊接。 - The machine is a special equipment for producing welding rod and this machine undertakes the coating procedure among the welding rod production.
本机是电焊条生产的专用设备，在焊条生产中该机承担涂粉工序。 - Study on Surfacing Characteristics of Bainite Welding Rod Repairing Frog Heart Track
基于贝氏体焊条修复辙叉心轨堆焊性研究 - Superfine cold drawn welding rod;
超细冷吧焊条； - For those local surface defects on chrome steel and chrome-molybdenum steel, welding rod A402 may be used for repairing, no other treatment is necessary.
铬钢和铬钼钢表面局部缺陷焊补可采用A402焊条补焊，不需处理。 - Effect of Forming Process of Combustion Welding Rod on Burning Rate
燃烧型焊条成型工艺对其燃烧的影响 - With arc starting and push current, effectively prevent welding rod sticking.
具有引弧，推力电流，有效防止焊条粘结。 - It points out that reasonable drug composition of welding rod can improve the low temperature properties of low carbon steel weld.
指出合理的焊条药皮组分可明显提高低碳钢焊缝的低温性能。 - Both sealed surfaces of the seat and disc are overlaying welded with Fe base stainless steel welding rod so as to improve wear resistance and erosion resistance.
阀座、阀瓣密封面均由铁基铬镍不锈钢焊条堆焊而成，提高了耐磨性和抗冲蚀性。 - Forming process of combustion welding rod was studied and the best parameters of forming process are following: controllability of the burning with the density of the rod2.
通过对燃烧型焊条成型过程实验研究，得出最佳成型工艺参数：药粉密度在2。 - 421 We need a piping material list ( list of piping support, bill of welding rod). trial balance of subsidiary ledger
我们需要一份配管材料表（管架一览表、焊条明细表）。明细帐科目余额试算表 - The carbon content being high, this kind of welding rod is not fit for welding mair conditioninghine parts that have to withstand high stress.
由于含碳量高，所以这种焊条不宜焊接必须承受高应力的机器部件。 - This paper expounds the regulations of the influence of the moisture, crystallizing mode of weld joint, droplet transfer, nonmetallic inclusion and other factors in the welding agent of Chrome-Nickel Austenic stainless steel welding rod.
文章阐述了铬镍奥氏体不锈钢焊接焊条药皮中水分含量、焊缝的结晶模式、熔滴过渡、非金属夹杂因素对焊缝中气孔的影响规律。 - The choice of plan, welding rod and technology of mending the broken tooths of a roller are much discussed.
着重论述了冷焊修补压榨辊崩齿的方案选定、焊条选择和工艺。 - In the light of the problems with the available rig drawworks drum welded with welding rod arc welding, a special welder of narrow-gap arc welding for rig drawworks drums is developed.
针对钻机绞车滚筒体采用手工电弧焊工人劳动强度大、焊接效率低、质量不稳定及返修率高等问题，研制了钻机绞车滚筒体窄间隙埋弧焊专机。 - Study on Bead Welding Rod of Wear-Resisting Alloy
耐磨合金堆焊焊条研究 - The smelting parameters and continuous-casting process in developing carbon welding rod steel of H08A are introduced, the cause for success and lost is analyzed, some measures proposed.
介绍了宣钢试验碳素焊条钢H08A的冶炼参数和连铸工艺，分析了试验成功的原因和失败的教训，提出了解决措施。 - The three factors influencing the welding quality are mainly discussed that contain the choice and importance of electric welding rod, electric welder and arc welder, welding and inspection pattern.
着重论述了直接影响焊接质量的三大因素，即电焊条、电焊机和电焊工的重要性及其选择，施焊和检查方式。 - Considering the characteristics of hydrogen stress corrosion, a restoration plan was made especially in weld preheating, post-weld heat treatment, welding rod and plate selection. Therefore, the hardness of the welding seam and heat-affected zone was reduced and residual stress was relieved.
结合氢应力腐蚀特点制定了修复方案，特别是焊前预热、焊后热处理、选择合适的焊条及板材，降低了焊道和热影响区硬度，消除残余应力。 - The smelting technology of H08A welding rod steel is analyzed, some measures against the problems existing proposed.
分析了宣钢炼铁厂H08A的冶炼工艺，对其存在的问题提出了改进措施。 - The research on new series of stainless steel welding rod
新型系列不锈钢焊条研究 - The influence of melt slag basicity to welding rod coating alloying element transition coefficient
熔渣碱度对焊条药皮中合金元素过渡系数的影响 - The requirement of welding rod for pressure vessel
压力容器对焊条的技术要求 - Thus formed TiC during crystallization can increase the hardness, ( wearability,) thermal resistance and high-temperature intensity of bead welding metal, which can greatly lower the cost of bead welding rod.
可见，在结晶过程中形成的TiC提高了堆焊金属的硬度、耐磨性、耐热性和高温强度，可大大地降低堆焊焊条的成本。 - Study of the Combustion Welding Rod Welding the Steel of A3
燃烧型焊条焊接A3钢的研究 - Due to the usage of a high chromium high nickel stainless steel welding rod, corrodent product film of welded joints is thin.
在焊接接头部位腐蚀膜比较薄，这是由于使用的是高铬高镍不锈钢焊条。 - The researcher of Tianjin University has developed one kind of low transformation point welding rod, it can be applied on the position of high-carbon steel welding and eliminates welding residual stress effectively.
天津大学焊接实验室研制了一种新型低相变点焊条，应用在中高碳钢钢板的焊接中，能很好的消除残余应力。